Product Introduction
Glass curtain wall is a modern building exterior wall decoration method. It refers to the building exterior protective structure or decorative structure that can have a certain displacement capacity relative to the main structure by the supporting structure system and does not share the effects of the main structure. There are two types of walls: single-layer and double-layer glass. The double-layer curtain wall can be divided into two types such as double-layer dynamic energy-saving curtain wall. This curtain wall can also be divided into two systems of natural ventilation and forced ventilation according to the ventilation principle. It consists of an outer curtain wall, an inner curtain wall, a sunshade, an air inlet device, and an air outlet device.
Production Process
1. Material selection Select high-quality glass sheets and select the required thickness according to requirements.
2. Glass cutting Precise cutting to ensure cutting quality and accuracy.
3. Glass edge grinding Fine grinding, edge grinding of the cut glass to eliminate sharp edges and fine cracks and improve the smoothness of the edges.
4. Washing and drying Wash the edged glass to remove dust, oil and impurities on the surface to ensure subsequent bonding. After washing, it needs to be dried to prevent moisture from affecting the subsequent processing.
5. Tempering The principle is to form a layer of compressive stress on the surface of the glass to prevent the glass from breaking, so as to improve the strength of the glass, and better resist breaking. Even if it breaks, it is small particles, which greatly reduces the possibility of injury.
6. Aluminum spacer processing and filling desiccant According to the design requirements, the aluminum spacer is folded into a frame using an aluminum bar bending machine. Molecular sieves are filled in the aluminum spacer. The function of the molecular sieve is to absorb the moisture in the hollow layer and keep the air dry.
7. Butyl glue and frame gluing Apply butyl glue evenly on the edge of the aluminum spacer to ensure the sealing of the hollow layer. Glue the aluminum spacer coated with butyl glue to the first piece of glass, and then glue the second piece of glass to the other side of the aluminum spacer to form a closed hollow layer.
8. Pressing and applying structural glue The well-mixed insulating glass is sent to the tablet press for pressing, and the glass and the aluminum spacer fit tightly. Apply structural glue on the frame of the insulating glass to enhance the sealing and stability.
9. Quality inspection: Strict quality inspection, including appearance inspection, dimension measurement, strength test, etc., is carried out to ensure that it meets relevant standards and requirements.
Product Specifications
| Aluminum strip thickness | 6A, 9A, 12A, 15A, 18A, 20A, 22A, 24A, 27A. |
| Single piece thickness | 5mm, 6mm, 8mm, 10mm, 12mm, etc. |
| Finished product thickness | Common insulating glass specifications are 6+9A+6mm, 8+12A+8mm, 10+12A+10mm, etc. |
| Original sheet specifications | 3300x2440mm, 3660x2440mm, 3660x2740mm, etc. |
| Customized according to customer needs. | |
Our services
Pre-sales service: provide samples;
Welcome to visit the factory; timely reply; professional sales team. Production cycle service: professional customization; timely update of progress; strict quality inspection;
Installation guidance: provide customers with installation guidance services for glass products to ensure the correct installation and use of the products.
After-sales service: regular follow-up; provide installation guide; timely solve after-sales problems.
FAQ
Q: Where is your factory located?
A: Our factory is located in Shenzhen, China.
Q: Are you a factory?
A: Yes, our factory covers an area of 8,000 square meters and has 60+ employees.
Q: What is your delivery time?
A: 10-20 days after the deposit and withdrawal are confirmed.
Q: What kind of services will you provide?
A: We are able to provide engineering and supervision services to guide the installation.
